PM36 (Glass Turret)

PM36 

PM36 is a high speed 6 sided vision inspection handler.

Features

  • High speed / high output (up to UPH 50K)
  • Able to process a wide spectrum of packages
  • Comprehensive vision inspection such as dismensional measurement, cosmetic and marking inspection.
  • Remote access and monitoring
  • Small footprint
  • Low noise level
  • Low maintainance

Product Specifications

PackagesDiscrete package, transistor, resistor, LED
MachineDimension (LxWxH)1600 x 1000 x 1800mm
Power110 or 230 VAC 50/60 Hz Single phase
Air70 psi ~ 5 BAR
Power consumption30 Amps
Machine controllerPC based (Pentium based, SVGA monitor, Keyboard & Track ball)
Input OptionsBowl
Output OptionsCanister bin (up to 5 bins)
Machine Performance UPHUp to 50,000
MTBA>1 hour based on lot size
MTBF>200 hours
MTTR<20 minutes
MTTA<30 seconds
Vision Inspection Capabilities Vision Repeatability Accuracy0.3 mil
GR&R< 10 %
Lead InspectionQuantity, Length, Width, Spacing, Tweeze / Implied Coplan, Slant, Spread, Whisker (>5 mil length), Bridging (>5 mil length), Standoff, Co-planarity, Bent in / out
Lead Inspection (leadless)Side lead spacing, Side lead standoff, Quantity, Length, Width, Spacing, Whisker (>5 mil length), Bridging (>5 mil length)
Mark InspectionMissing, Llegible, Incomplete, Incorrect, Mis-Aligned, Double, Angle, Reverse, No mark, Bow, Extra ink, Smeared/Blurred, Scratch/Broken, 2D Matrix code
Package InspectionIncomplete mold, orientation (Notch), *Contamination, *Chipping, *Void,
*Must >10 mil area depending on image resolution, inspection criteria and capability. Subjected to package type, size, color and material.
Package Inspection (leadless package)Incomplete mold, orientation (Notch), *Contamination, *Chipping, *Void, Unit dimension, Pad, Mold Flash, Saw offset
*Must >10 mil area depending on image resolution, inspection criteria and capability. Subjected to package type, size, color and material.