PM3500 is a high speed turret test and vision inspection handler.
Available Models
Model Input / Output Type
PM3510 Bowl-to-Tape & Reel handler
PM3520 Bowl-to-Tape & Reel handler, with metal tube reject bins
PM3530 Tube-to-Tube handler
PM3540 Tube-to-Tape & Reel handler
Features
- Able to process a wide spectrum of packages
- Fast conversion (<1 hour)
- Pneumatic unit singulation
- Upgradeable to dual output
- Remote access & monitoring
- Compact size
Product Specifications
Packages QFN, MLP, DFN, SOIC 8L, SOT23, TSOT, SC70, SOT89, SOT223
Machine Dimension (LxWxH) 1170 x 920 x 1015mm
Power 208 or 230 VAC 50/60 Hz Single phase
Air 70 psi
Power consumption 20 Amps
Machine controller PC based (Pentium based, SVGA monitor, Keyboard & Track ball)
Input Options Bowl, Tubes
Output Options Tape & Reel, Tubes and Bins
Machine Performance UPH Up to 36,000 (dry cycle run with units)
MTBA >1 hour based on lot size
MTBF >200 hours
MTTR <20 minutes
MTTA <30 seconds
Vision Inspection Capabilities Vision Repeatability Accuracy 0.3 mil
GR&R < 10 %
Lead Inspection Quantity, Length, Width, Spacing, Tweeze / Implied Coplan, Slant, Spread, Whisker (>5 mil length), Bridging (>5 mil length), Standoff, Co-planarity, Bent in / out
Lead Inspection (leadless) Side lead spacing, Side lead standoff, Quantity, Length, Width, Spacing, Whisker (>5 mil length), Bridging (>5 mil length)
Mark Inspection Missing, Llegible, Incomplete, Incorrect, Mis-Aligned, Double, Angle, Reverse, No mark, Bow, Extra ink, Smeared/Blurred, Scratch/Broken, 2D Matrix code
Package Inspection Incomplete mold, orientation (Notch), *Contamination, *Chipping, *Void,
*Must >10 mil area depending on image resolution, inspection criteria and capability. Subjected to package type, size, color and material.
Package Inspection (leadless package) Incomplete mold, orientation (Notch), *Contamination, *Chipping, *Void, Unit dimension, Pad, Mold Flash, Saw offset
*Must >10 mil area depending on image resolution, inspection criteria and capability. Subjected to package type, size, color and material.
Others In-pocket non sealed inspection
Test Specifications Test sites Up to 4 test sites
Contact Finger Kelvin or non-Kelvin contact finger
(10 micron inch Full hard gold plating)
Contact Resistance > 0.2 Ohms per finger
Durability 300k - 500k
Tape & Reel Specifications Seal Shoe - Heat Seal 0.5 - 0.7mm Heat Seal Lip Width
Seal Temperature User defined
Seal Time (Dwell) User defined
Seal Pressure Cam system
Carrier Tape Drive Method Micro Stepping Motor
Conversion time 30 to 60 minutes (for entire package type change)
5 minutes for same package size
